SALE PRICE: $25.00
OUR PRICE: $59.99
MSRP: $69.99
You save $44.99

BLOCKS Squonk MOD / Kit by Uwell

Add to Cart


SALE PRICE: $25.00
OUR PRICE: $59.99
MSRP: $69.99
You save $44.99


SKU:210024 ,Availability: ,Width: ,Height: ,Depth:


Ships within 24 to 48 hours (see our shipping policy for details).


DOA Warranty on the RDA. 30-Day Limited Warranty on the MOD. See warranty sectio…


DOA Warranty on the RDA. 30-Day Limited Warranty on the MOD. See warranty section for details.


BLOCKS 90W Squonk MOD / Kit by Uwell

The BLOCKS Squonk MOD is the everyday vape offering from Uwell that is as beginner-friendly as it is versatile and functional. Performing like a mechanical mod thanks to the direct voltage output, the BLOCKS incorporates a 90W ceiling that helps keep things in your atomizer under control, and the sizable 15mL capacity will have you vaping without a care all day long! But you won't get tired with any unwieldy squonking mechanisms—the BLOCKS's patented pumping mechanism allows for incredibly easy one-handed squonking.


Uwell BLOCK 90W Squonk MOD

  • Superior Zinc-Alloy, ABS, PC, & Stainless Steel Chassis
  • Proprietary Uwell Chipset
    • Direct Voltage Output
      • 90W Max
      • Power Output Based on Current Battery State
    • Resistance Range: 0.1 - 0.5 ohms
  • 15mL Juice Capacity
    • Hard ABS Squonk Bottle
    • Patented Pump Dispersal
      • 0.13mL Pump
  • Accepts Single 18650 Batteries
    • Tool-less Battery Bay Door
    • LED Battery Life Indicator
  • Single Button Control Interface
    • Oversized Firing Button
    • 5-Click On/Off Feature
  • Side-Mounted Micro-USB Charge Port
  • Stainless Steel 510 Threads
    • Leakproof 510 Connection
  • Safety Protection Suite:
    • Short Circuit
    • Reverse Polarity
    • PCB Temperature Monitoring
    • High/Low Voltage
    • Puff Cutoff
  • Dimensions: 93.07mm x 49mm x 25mm


  • Stainless Steel / PCM Construction
  • Two Post Clamp Style Build Deck
    • 2.5mm x 3mm Terminals
      • Top Mounted Hex Screws
    • 4mm Deep Juice Well
    • Large Build Area for Specialty Coil
    • PEEK Insulator
  • Fully Adjustable Airflow
    • Dual Airflow Slots
      • 8mm x 2.5mm Airflow Slots
    • Single or Dual Coil Airflow
  • Tapered 810 Delrin 510 Drip Tip
    • 11mm Diameter
  • Dimensions: 24mm x 34.6mm

Box Contents

Full Kit

  • 1x BLOCKS 90W Squonk MOD
    • 2x NiChrome Coils - 0.3 ohm
  • 1x Extra Female Screw
  • 1x Wrench
  • 1x 510 Pin
  • 1x Insulator
  • 1x Japanese Organic Cotton
  • 1x Pack of O-rings
  • 1x Micro USB Cable
  • 1x User Manual

MOD Only

  • 1x BLOCKS 90W Squonk MOD
  • 1x Micro USB Cable
  • 1x User Manual

IMPORTANT NOTE: Mechanical MODs are an ADVANCED USER PRODUCT and should NOT be used by ANYONE without the proper knowledge on your Battery's Amp Limit and how to test your Atomizer's resistance. Please note that we do NOT offer any warranty or exchanges on any mechanical MODs due to the nature of this product. DOA warranty ONLY! Please be careful when disassembling your MOD, as some parts may be fragile and require extra care. We check each MOD before they are shipped out to you and we are NOT responsible for any parts lost by you.

IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

Customers Also Viewed