Loading... Please wait...

Chapter IV "Bogan Edition" 21700 Mech MOD Kit by Deathwish Modz x The Vaping Bogan

$199.99
SKU: 400402
Availability:
Ships within 24 to 48 hours (see our shipping policy for details).
Qty

    This product is not eligible for any discounts or promotional offers!

    Chapter IV "Bogan Edition" 21700 Mech MOD Kit || Deathwish Modz x The Vaping Bogan

    The world has waited long enough – here comes a new single-cell Mech Tube & RDA from the infamous Deathwish Modz!

    This Bogan Edition of the Crossbones IV tube chassis features a gorgeous and sleek design, is made for 21700 cells and sports a re-worked, remastered version of the V2 Switch mechanism.  Complete with the Unholy V3 RDA (with a clean new engraving), which offers the same building experience as its predecessor, but features an improved airflow that makes every draw smooth and satisfying.  The over-sized Drip Tip, praised on the larger Deathwish Modz RDAs, is now standard on the Chapter IV "Bogan Edition" sets.  Finally, this limited edition only has 125 units made, so be sure to get yours today, and see why Deathwish Modz does tubes best!

    This exclusive setup is limited to only 125 units per colorway!  Be sure to get yours before they're gone!

    *PLEASE NOTE THIS PRODUCT WILL ONLY SHIP TO A VERIFIED DOMESTIC BILLING ADDRESS (Your U.S. Credit Card Billing Address) & WILL REQUIRE A SIGNATURE AT DELIVERY. INTERNATIONAL CUSTOMERS MUST PAY BY BANK WIRE TRANSFER. INTERNATIONAL INQUIRES CAN BE MADE >HERE<

    *This product does not qualify for free shipping and it has a fixed insured shipping cost of $7.99 for U.S. addresses ONLY.

    Find Your Spares and Supplies Here:

    Features

    Chapter IV "Bogan Edition" 21700 Mech MOD

    • Stainless Steel, Brass or Copper Chassis
      • "Bogan" Engraved Design
      • Single Set of Chassis Threads
      • Limited Edition, Only 125 Units Produced per Colorway
    • Accepts Single 21700, 20700 or 18650 Batteries
      • 18650 Battery Adapter Sleeve Required (NOT INCLUDED)
    • Hybrid 510 Connection
    • NEW UPGRADED Spring-Loaded Firing Switch
      • Signature Crossbones v2 Copper Switch
      • Silver-Plated Spring
      • Silver-Plated Copper Battery Contact
      • PEEK Insulation
    • Diameter: 28mm

    Unholy v3 RDA

    • Stainless Steel, Brass or Copper Construction
      • Matching Finish
    • Two-Post Build Deck
      • Ball-Bearing Clamping Mechanism
        • One 4mm Encased Ball-Bearing per Post
          • Insert Lead Above or Below Bearing
      • Allen Grub Screws
        • Top-Tension
      • PEEK Insulation
    • Fully Adjustable AFC
    • Includes Two (2) Oversized DWM Wide Bore 810 Drip Tips
      • Oversized DWM Frosted / Clear Wide Bore 810 Drip Tip (Pre-installed)
      • Oversized DWM Delrin Wide Bore 810 Drip Tip
    • Copper Positive Pin
    • Diameter: 28mm

    Box Contents

    • 1x Chapter IV "Bogan Edition" 21700 Mech MOD
    • 1x Unholy v3 RDA
      • Oversized DWM Frosted / Clear Wide Bore 810 Drip Tip (Pre-installed)
    • 1x Spare Parts Box
      • 1x Spare Switch Spring
      • 1x Oversized DWM Delrin Wide Bore 810 Drip Tip
      • 2x Spare Ball Bearing
      • 2x Spare Grub Screw
      • Spare O-Rings

    PLEASE NOTE: This is a direct battery contact mechanical device and it is strictly for ADVANCED USERS ONLY! Be sure to check your atomizer's 510 connection when using it with this device. If your atomizer's positive pin in the center of the 510 connection does not protrude >1mm from the threads of the connection, your device WILL fail catastrophically. Use at your own risk! This mod does not have a locking mechanism, so keep it away from children! Mechanical mods are an advanced user product and should not be used by anyone without the proper knowledge on your battery's amp limit and how to test your atomizer's resistance. This mechanical mod uses very strong magnets in the switch—please be careful when disassembling your mod. Avoid using your device to the point where the batteries are completely discharged. Always double-check the resistance of your atomizer on an external ohmmeter, and ensure that your batteries are inserted with the positive pole facing the atomizer in order to prevent battery failure.

    IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    View Cart Go To Checkout
    

    Please Sign Up For Our Newsletter

    * indicates required