Crown 2 (II) Atomizer Heads by Uwell
One of the Crown II's most dramatic improvements lies in the redesigned atomizer heads: dubbed "Bullet Coils", referring to the uniquely cone-shaped positive pole electroplated in gold for optimum conductivity and internal resistance, these atomizer heads have upgraded airflow channels which, alongside the improved chimney, maintain a consistently smooth draw. Utilizing 100% organic Japanese cotton wicking for exceptionally pure flavor, these atomizer heads come in three different resistances: 0.2 ohm, which is best for large clouds and rapid ramp-up times; 0.8 ohm, designed to be the most juice-efficient and flavorful; and 0.5 ohm, the perfect balance between clouds and flavor. The 0.2 ohm and 0.5 ohm heads hold stainless steel heating elements, and as such, can be used in both VW and TC mode.
WARNING: These are sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using sub-ohm coils. These coils will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 25A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.