Crown RDA Clone by Yeahsmo

The Crown (clone) by Yeahsmo is a 21mm Rebuildable Dripping Atomizer ( RDA ) that features a stainless steel body, crown design adjustable airflow controller ring, a 17mm deck with a deep juice well and a triple post design.

Rebuildable Atomizers are for the vaping enthusiast and will allow you to build your own coil and wicking system.

The deck of the Crown has deep juice well that allow you to overdrip and it will help reduce the frequency of having to drip as often.

It's 17mm inner chamber has a triple post, flat head screw design that will allow easy single and dual coil builds.

The posts also have pre-drilled holes to allow you to easily build your coils.

The Crown's top cap has an adjustable airflow controller ring that has a unique changable crown-like design with four air hole sizes.

With a simple twist you can choose between dual 1mm, 1.5mm, 2.0mm or 2.5mm size holes.

You can also customize the look of your Crown to match your favorite MODs by changing to a stainless steel, brass or copper finish airflow controller ring (all three finishes are included).

For best results, we recommend to wash the entire Atomizer before use.

IMPORTANT NOTE: The Crown Rebuildable Dripping Atomizer ( RDAs ) are for EXPERTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

Yeahsmo Crown (clone) Features

• Rebuildable Dripping Atomizer
• Stainless Steel Body
• Crown-design Adjustable Airflow Controller Ring
• Dual 1.0mm, 1.5mm, 2.0mm & 2.5mm air hole sizes
• Airflow controller can be changed to stainless steel or brass finish
• 17mm deck with deep juice well
  
• Triple Post flat head screw design
• Can be built with Single or Dual Coils
  
• Can be built with Silica, Ekowool & Organic Cotton
• Can be used with 'most' 510 size Drip Tips
• 21mm Diameter

OTHER IMPORTANT NOTES

1. Wicks / Coils must be tested carefully with a multimeter before use.
2. If Wick / Coil is not properly tested it will be a risk to the user to do so.
3. Faulty Wicks / Coils WILL kill electronic devices.
4. New Wick / Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
5. No new Wick / Coil assembly should be used on an electronic device until it is known to be safe.
6. These items destroy electronic devices if not properly built.  This is a known issue.

The Crown Clone comes with

• 1x Yeahsmo Crown Rebuildable Dripping Atomizer Clone
  
• 1x Stainless Steel Crown Airflow Controller Ring
• 1x Brass Crown Airflow Controller Ring
• 1x Copper Crown Airflow Controller Ring