Loading... Please wait...

Deathtrap RDA by Deathwish Modz (24mm / 30mm)

SKU: 120807
Ships within 24 to 48 hours (see our shipping policy for details).

    Deathtrap RDA by Deathwish Modz  (24mm / 30mm)

    Some drippers play it safe, not wanting to rock the boat. The Deathtrap, however, lives dangerously and takes more risks than a gambling addict. Thankfully, Deathwish Modz' bets paid off in spades with the Deathtrap RDA. Making use of a surprisingly functional build deck that is as unique as the vaper using it, the Deathtrap is the ideal dripper for flavor-fienders with big builds and bigger ambitions.

    The most obvious aspect of this dripper is its skewed mindset—more specifically, the build deck's offset post positioning concealed by the external sleeve and top cap. This perfectly planned post placement profoundly promotes the performance and perceived taste of large, bulky single coils (or even more coils using a stacked build). The airflow of the Deathtrap is similarly designed to boost flavor, much to the glee of admirers of excellent aromas. A single thin slot extending nearly half the circumference of the Deathtrap directs focused air towards the front-face of your coil build. Two small cyclops slots on the opposite side direct air straight underneath your coil leads, supporting hot builds and dense vapor with cooling auxiliary airflow. Both sources of airflow can be adjusted by twisting the top cap and external sleeve. 

    Get Drip Tips That Fit Right HERE

    Build The Perfect Vape HERE


    • Stainless Steel Construction
    • Single Coil Build Deck
      • Two Clamp Posts
        • Offset Positioning
        • Single Terminal Each
          • Top-Secured Clamp
          • 2x Flathead Screws Each
        • Milled Negative Post
          • Reduces Voltage Drop
        • Insulated Positive Post
          • PEEK Insulation
    • Dual Sources of Fully Adjustable Airflow
      • Primary Source – Single Long Slot
        • Direct Side-Feed
          • Exits Thru External Sleeve
          • Air Hits Front Face of Coil
        • Throttled via Twisting Top Cap
      • Secondary Source – Dual Small Cyclops Slots
        • Auxiliary Side-Feed
          • Exits Thru Holes in Posts
          • Air Directed Underneath Coil
        • Throttled via Twisting External Sleeve
      • Sources Positioned on Opposite Sides of External Sleeve
    • Silver-Plated Copper Positive Pin
      • Includes Squonk-Ready Positive Pin
    • Wide Bore Ultem Drip Tip
    • Diameter: 24mm -or- 30mm

    Box Contents

    • 1x Deathtrap RDA by Deathwish Modz
    • 1x Squonk-Ready Positive Pin
    • 1x Micro Flathead Screwdriver
    • 1x Pack of Spare Parts

    IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    View Cart Go To Checkout

    Please Sign Up For Our Newsletter

    * indicates required