DRAG Mini 117W MOD / Kit by VooPoo

DRAG Mini 117W MOD / Kit by VooPoo

The Drag Mini is the little brother to the critically acclaimed original, sporting a conveniently integrated battery that's perfect for charging on-the-go, a reduced size for greater portability, and the same features you've come to love from every GENE FIT chipset. Sporting a 117W limit and a fully capable temperature control module, the DRAG Mini is an excellent choice for vapers while they're out and about. 

The T2 Sub-Ohm Tank from Uforce is an fantastic complement to the DRAG Mini's performance. This tank comes with a 3.5mL and 5mL tank that are interchangeable, giving you the choice between light sips and filling up for the day. In addition, the T2's superior atomizer coil heads utilize a kanthal mesh heating element alongside organic cotton wicking for exceptionally rich flavor that is enhanced by the short pathway that leaves flavor unmuddled and perfectly crisp.

Find Your Spares and Supplies Here:

Features

DRAG Mini Box MOD

• Superior Zinc Alloy Chassis Construction
• Visually Striking Resin Inlay Design
• Integrated 4400mAh Rechargeable Battery
• Powered by GENE FIT Chipset
• Battery Set 
• Flavor Set
• Cloud Mode 
• POWER Mode
• Power Mode:
• Wattage Output Range: 5W – 117W
• Voltage Output Range: 0V – 7.5V
• Resistance Range: 0.05 ohms – 3.0ohms 
• Temperature Mode:
• Temperature Range: 200°-600°F
• Resistance Range: 0.05 ohms – 1.0ohms
• Supports:
• Ni200
• Titanium
• Stainless Steel
• TCR
• Intuitive OLED Screen
• Large Firing Button
• Mode-Setting Button
• Two Adjustment Buttons
• Front-Mounted Micro-USB Port
• Safety Protection Suite:
• PCB Temperature Monitoring
• High Amperage
• High / Low Voltage
• Short Circuit
• 10sec Puff Cutoff
• Centered Bare Stainless Steel 510 Connection
• Gold-Plated 510 Positive Pin
• Dimensions: 81.5mm x 48.5mm bx 25.5mm

UForce T2 Sub-Ohm Tank

• Superior 304 Stainless Steel / Pyrex Glass Construction
• 3.5mL / 5mL Juice Capacity
• 5mL Bubble / 3.5mL Straight Tube Tank
• Slide-Away Top-Fill Cap
• Quick Vent Channel Design for Rapid Heat Discharge
• Fully Adjustable Airflow
• Triple Airflow Slots
• UFORCE OCC Coil Technology
• P2
• 0.6Ω
• Single Mesh Coil
• Wattage Range: 24W - 28W
• N1
• 0.13Ω
• Single Mesh Coil
• Wattage Range: 50-100W 
• 10mm Bore Acrylic Resin Drip Tip
• 24K Gold-Plated 510 Connection
• Diameter: 25mm 
• 28mm At Tank

Box Contents

MOD Only

• 1x DRAG Mini 117W MOD
• 1x Micro-USB Cable
• 1x User Manual
• 1x Warranty Card

Full Kit

• 1x DRAG Mini 117W MOD
• 1x Uforce T2 Sub-Ohm Tank Atomizer
• 1x UForce P2 0.6Ω Single Mesh Coil
• 1x 5mL Bubble Glass Tank Replacement
• 1x UForce N1 0.13Ω Single Mesh Coil
• 1x 3.5mL Straight Tube Glass Tank Replacement
• 1x Micro-USB Cable
• 1x Spare Parts Bag
• 1x User Manual
• 1x Warranty Card

IMPORTANT NOTE: Understanding how to handle and care for Lithium type batteries is very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled. We recommend using 18650 batteries capable of high-drain amperage with this device, such as the LG HG2 or the Samsung 30Q. DO NOT charge your batteries overnight or while unattended for a prolonged period of time! Always charge your batteries in a fire-proof surface/area and DO NOT expose them to high temperatures (e.g. inside your car). DO NOT expose the battery's terminals to metal objects or immerse in water/liquid. We are not responsible for any damage if there is any misuse, abuse or modification of the batteries and/or chargers in any shape or form (including pack making). Furthermore, Electric Vapor Cigarettes LLC (a.k.a. EVcigarettes.com) will not be held responsible or liable for any injury, property damage, or defect that is caused by misuse, abuse or modification of Lithium batteries and/or chargers.

WARNING: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.