Falcon King Sub-Ohm Tank Atomizer | HorizonTech

The Falcon King Sub-Ohm Tank truly expands the phenomenal Falcon mesh series, deploying a brand-new exterior design overhaul with beautiful metal construction and intricate resin drip tip while introducing a new Falcon M Dual & M1+ Mesh with Bamboo Fibers. The Falcon King has a base diameter of 26.2mm and a maximum diameter of 28mm with bubble tank and a height of 28mm. The Falcon King has a redesigned swivel top fill system with a single fill port and a maximum tank capacity of 6ml. This vape tank comes with the new M1+ Falcon King single mesh coil that has an atomizer resistance of 0.16ohm, best at 75W. This tank also comes with the new M-Dual mesh coil that has an atomizer resistance of 0.38ohm and is best used at 80W. Both of these replacement coils use bamboo fiber wicking material. The Falcon King by HorizonTech is an amazing vape tank built behind an amazing reputation of amazing flavor and consistent performance.

Find Your Spares and Upgrades Here:

Features

• Stainless Steel / Pyrex Glass Construction
• 2mL / 6mL Juice Capacity
• 6mL with Bulb Glass Tank (Pre-installed)
• Swivel Top-Fill Mechanism
• Push Button to Unlock
• Fully Adjustable Bottom Airflow
• Dual Cyclops Slots
• 11mm x 3mm Each
• Horizon Falcon Coil Family
• Stainless Steel Chassis
• F1 Coil - 0.2 ohm
• Parallel Vertical Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.2Ω
• Wattage Range: 70W - 90W
• F2 Coil - 0.2 ohm
• Parallel Vertical Coil
• Wicking Material: Flax Fiber
• Resistance: 0.2Ω
• Wattage Range: 70W - 90W
• F3 Coil - 0.2 ohm
• Parallel Vertical Coil
• Wicking Material: Flax Fiber + Flax Paper
• Resistance: 0.2Ω
• Wattage Range: 60W - 80W
• M1 Coil - 0.15 ohm
• Mesh Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.15Ω
• Wattage Range: 70W - 80W
• M2 Coil - 0.16 ohm
• Dual Mesh Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.16Ω
• Wattage Range: 70W - 80W
• M-Triple Coil - 0.15 ohm
• Triple Mesh Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.15Ω
• Wattage Range: 80W - 85W
• M-Dual Coil - 0.38 ohm
• Dual Mesh Coil
• Wicking Material: Bamboo Fiber
• Resistance: 0.38Ω
• Recommended Wattage: 80W
• M1+ Coil - 0.16 ohm
• Single Mesh Coil
• Wicking Material: Bamboo Fiber
• Resistance: 0.16Ω
• Recommended Wattage: 75W
• Includes Resin 810 Drip Tip
• 7mm Bore Width
• Gold-Plated 510 Positive Pin
• Dimensions: 59.5mm (H) x 28mm (D)
• Base: 26mm 

Box Contents

• 1x Falcon King Sub-Ohm Tank Atomizer
• 1x Bubble Glass Tank - 6mL (Pre-installed)
• 1x M-Dual (Bamboo Fiber) - 0.38 ohm (80W) (Pre-Installed)
• 1x M1+ (Bamboo Fiber) Coil - 0.16 ohm (75W)
• 1x Spare Straight Glass Tank - 2mL
• 1x Spare O-Rings Set

IMPORTANT NOTE: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.