Falcon Sub Ohm Tank Atomizer | HorizonTech

Introducing Horizon Tech’s new flagship tank, a sub-ohm tank that’s uniquely designed and geared towards high performance and a classy feel. Horizon has been on the edge of innovation with all of its past products, but they’re tipping the edge with the new Falcon Sub Ohm Tank that utilizes Horizon Falcon Coil Technology, which combines flax and wood pulp materials. You’ve never experienced a tank quite like the Horizon Falcon Sub Ohm Vape Tank! Constructed of stainless steel and pyrex glass, you’ll find this is an incredible addition to any mod you own. It offers a gold-plated 510 connection and uses a sloped resin wide bore drip tip. Focusing heavily on airflow, the Falcon Tank boasts triple adjustable airflow control to maximize vapor production. Additional features include a large 5ML e-liquid capacity and a convenient top fill design. It’s an innovative tank that generates great versatility for an improved vaping experience!

Find Your Spares and Upgrades Here:

Features

• Stainless Steel / Pyrex Glass Construction
• 5mL / 7mL Juice Capacity
• 7mL with Bulb Glass Tank (Pre-Installed)
• Threaded Top-Fill Cap
• Fully Adjustable Bottom Airflow
• Dual Cyclops Slots
• 10mm x 3mm Each
• Horizon Falcon Coil Family
• Stainless Steel Chassis
• F1 Coil - 0.2 ohm
• Parallel Vertical Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.2Ω
• Wattage Range: 70W - 90W
• F2 Coil - 0.2 ohm
  
• Parallel Vertical Coil
• Wicking Material: Flax Fiber
• Resistance: 0.2Ω
• Wattage Range: 70W - 90W
• F3 Coil - 0.2 ohm
• Parallel Vertical Coil
• Wicking Material: Flax Fiber + Flax Paper
• Resistance: 0.2Ω
• Wattage Range: 60W - 80W
• M1 Coil - 0.15 ohm
• Mesh Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.15Ω
• Wattage Range: 70W - 80W
• M2 Coil - 0.16 ohm
• Dual Mesh Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.16Ω
• Wattage Range: 70W - 80W
• M-Triple Coil - 0.15 ohm
• Triple Mesh Coil
• Wicking Material: Wood Pulp + Cotton
• Resistance: 0.15Ω
• Wattage Range: 80W - 85W
• M-Dual Coil - 0.38 ohm
• Dual Mesh Coil
• Wicking Material: Bamboo Fiber
• Resistance: 0.38Ω
• Recommended Wattage: 80W
• M1+ Coil - 0.16 ohm
• Single Mesh Coil
• Wicking Material: Bamboo Fiber
• Resistance: 0.16Ω
• Recommended Wattage: 75W
• Includes Resin 510 Drip Tip
• Gold-Plated 510 Positive Pin
• Dimensions: 55mm (H) x 28mm (D) (with Bubble Glass)
• Base: 25mm

Box Contents

• 1x Falcon Sub-Ohm Tank Atomizer
• 1x M1 Coil - 0.15 ohm (70W - 80W) (Pre-Installed)
• 1x Bubble Glass Tank - 7mL (Pre-Installed)
• 1x M2 Coil - 0.16 ohm (70W - 80W)
• 1x Spare Straight Glass Tank - 5mL
• 1x Spare O-Rings Set

IMPORTANT NOTE: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.