The King 20700 Stack Mech MOD from Purge Mods is an exceptionally designed mechanical vaping platform that boasts a captivating aesthetic matched only by its legendary performance. Backed by the signature ultra-capable Purge Mods firing switch, this series-stacked mech mod hits harder than ever before, boosting your clouds and competitive performance to new horizons. Included is a matching PRG-25 Cap for the Carnage RDA Deck (sold separately).
*PLEASE NOTE THIS PRODUCT WILL ONLY SHIP TO A VERIFIED DOMESTIC BILLING ADDRESS (Your U.S. Credit Card Billing Address) & WILL REQUIRE A SIGNATURE AT DELIVERY. INTERNATIONAL CUSTOMERS MUST PAY BY BANK WIRE TRANSFER. INTERNATIONAL INQUIRES CAN BE MADE >HERE<
*This product does not qualify for free shipping and it has a fixed insured shipping cost of $9.99 for U.S. addresses ONLY.
Find Spares and Upgrades Here:
King Stack 20700 Mech MOD
**The 18650 adapter sleeve MUST be placed over the positive side of your battery. The copper contact on the sleeve must be between the battery positive and the atomizer's positive pin. Do NOT place the sleeve on the negative side of your battery or you run the risk of the mod auto-firing.
**THIS DEVICE IS 8.4 VOLTS** This mechanical mod is stacked in series, meaning that your maximum voltage (4.2V) will be multiplied by the number of battery cells in series, which does the same to your amperage load as well. As such, series mechanical mods require extensive knowledge and familiarity with both Ohm’s Law and battery safety/amp limits in order to be used without risk of damage to yourself or your surroundings. If you are at all unfamiliar with this subject, feel free to contact us and we’ll be happy to either provide additional information or suggest comparable alternatives, such as an unregulated device wired in parallel. Use this device with caution and at your OWN RISK. By purchasing this device, you agree that we are NOT liable for any damages due to misuse.
IMPORTANT NOTE: This is a direct battery contact mechanical device and it is strictly for ADVANCED USERS ONLY! Be sure to check your atomizer's 510 connection when using it with this device. If your atomizer's positive pin in the center of the 510 connection does not protrude >1mm from the threads of the connection, your device WILL fail catastrophically. Use at your own risk! This mod does not have a locking mechanism, so keep it away from children! Mechanical mods are an advanced user product and should not be used by anyone without the proper knowledge on your battery's amp limit and how to test your atomizer's resistance. This mechanical mod uses very strong magnets in the switch—please be careful when disassembling your mod. Avoid using your device to the point where the batteries are completely discharged. Always double-check the resistance of your atomizer on an external ohmmeter, and ensure that your batteries are inserted with the positive pole facing the atomizer in order to prevent battery failure.
IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.