MaxLuke (FireLuke 3) Sub-Ohm Tank Atomizer || FreeMax

The MaxLuke a.k.a. the FireLuke 3 is the latest in the FireLuke family of Tank Atomizers by FreeMaX.  The MaxLuke is an upgraded version of well-known FireLuke 2 and incorporates a unique, three steel ball mechanism for the top cap for easy refilling while preventing potential leaks.  The new SS904L coils are made of mesh and feature tea fiber cotton wicking, providing a more enjoyable vaping experience.  The MaxLuke can hold up to 3mL (5mL with included Bubble Tank) with the Honeycomb Glass while the resin accents matches the Maxus 100W MOD perfectly. 

Features 

• Stainless Steel / Resin / Pyrex Glass Construction
• 3mL/5mL Juice Capacity
• 3mL Honeycomb Glass (Pre-installed)
• 5mL Bubble Glass
• Top-Fill
• 3 Steel Ball System Top Cap
• Slide to Open/Close
• Kidney Bean Fill Port
• Fully Adjustable AFC
• Dual Cyclops Slots
• 10mm x 3mm Slot Per Side
• Wide Bore Resin 810 Drip Tip
• FireLuke Mesh Pro Coil Family
• Tea Fiber Cotton
• TX1 Mesh Coil
  
  • Resistance: 0.15 ohm
  • Material: Kanthal
  • Coil Type: Single Mesh
  • Wattage Range: 40W - 90W
• TX2 Mesh Coil
  
  • Resistance: 0.2 ohm
  • Material: Kanthal
  • Coil Type: Double Mesh
  • Wattage Range: 40W - 80W
• TNX2 Mesh Coil
• Resistance: 0.5 ohm
• Material: Kanthal
• Coil Type: Triple Mesh
• Wattage Range: 20W - 50W
• TX3 Mesh Coil
• Resistance: 0.15 ohm
• Material: Kanthal
• Coil Type: Triple Mesh
• Wattage Range: 50W - 90W
• TX4 Mesh Coil
• Resistance: 0.15 ohm
• Material: Kanthal
• Coil Type: Quad Mesh
• Wattage Range: 40W - 80W
• TX1 SS316L Mesh Coil
  
  • Resistance: 0.12 ohm
  • Material: SS316L
  • Coil Type: Single Mesh
  • Temp Range: 400°F - 550°F
• X1 Mesh Coil
• Resistance: 0.15 ohm
• Material: Kanthal
• Coil Type: Single Mesh
• Wattage Range: 40W - 80W
• X2 Mesh Coil
• Resistance: 0.20 ohm
• Material: Kanthal
• Coil Type: Dual Mesh
• Wattage Range: 40W - 80W
• NX2 Mesh Coil
• Resistance: 0.50 ohm
• Material: Kanthal
• Coil Type: Dual Mesh
• Wattage Range: 20W - 50W
• X3 Mesh Coil
• Resistance: 0.15 ohm
• Material: Kanthal
• Coil Type: Triple Mesh
• Wattage Range: 50W - 90W
• X4 Mesh Coil
• Resistance: 0.15 ohm
• Material: Kanthal
• Coil Type: Quad Mesh
• Wattage Range: 40W - 80W
• 904L X1 Mesh Coil
• Resistance: 0.15 ohm
• Material: SS904L
• Coil Type: Single Mesh
• Wattage Range: 40W - 80W
• Best: 70W
• 904L X2 Mesh Coil
• Resistance: 0.2 ohm
• Material: SS904L
• Coil Type: Dual Mesh
• Wattage Range: 40W - 80W
• Best: 70W
• 904L X2 Mesh Coil
• Resistance: 0.5 ohm
• Material: SS904L
• Coil Type: Dual Mesh
• Wattage Range: 20W - 50W
• Best: 45W
• 904L X3 Mesh Coil
• Resistance: 0.15 ohm
• Material: SS904L
• Coil Type: Triple Mesh
• Wattage Range: 50W - 90W
• Best: 80W
• 904L X4 Mesh Coil
• Resistance: 0.15 ohm
• Material: SS904L
• Coil Type: Quad Mesh
• Wattage Range: 40W - 80W
• Best: 70W
• Gold-Plated 510 Positive Pin
• Dimensions: 49mm (L) x 27.5mm (D)
• Weight: 48.5g

Box Contents

• 1x MaxLuke (FireLuke 3) Sub-Ohm Tank Atomizer
• 1x Honeycomb Glass - 3mL (Pre-installed)
• 1x 904L X2 Dual Mesh Coil - 0.5 ohm (20W - 50W) (Pre-installed)
• 1x 904L X1 Single Mesh Coil - 0.15 ohm (40W - 80W)
• 1x Spare Bubble Glass Tank - 5mL
• 1x Spare O-Ring Bag
• 1x User Manual

IMPORTANT NOTE: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.