Loading... Please wait...

Mesh Pro | Firelock | Fireluke | Fireluke Pro | Mesh Pro Atomizer Coil Heads by Freemax (3pcs)

$15.99 (You save $2.00)
SKU: 280199
Ships within 24 to 48 hours (see our shipping policy for details).

    Mesh Pro | Firelock | Fireluke | Fireluke Pro | Mesh Pro Atomizer Coil Heads by Freemax (3pcs)

    The Firelock atomizer coil heads from FreeMax is the perfect replacement / refresher for your high performance Fireluke, Fireluke Pro, or Mesh Pro Sub-Ohm Tank! These coil heads arrive in sets of three—equipped with your choice of one, two, or three mesh coils wrapped safely in organic cotton wicking ready for priming, these coils find the perfectly pleasing balance of flavor and vapor that you're searching for. Available with your choice of a traditional Kanthal-A1 or a TC-friendly SS316L heating element, the FreeMax Firelock Mesh Pro Coil Heads are a fantastic upgrade from the stock coils of the Fireluke and Fireluke Pro!


    • FireLuke Mesh Pro Coil Family
      • Kanthal Single Mesh
        • Resistance: 0.15 ohm
        • Material: Kanthal
        • Coil Type: Single Mesh
        • Wattage Range: 40 to 70W
      • Kanthal Double Mesh
        • Resistance: 0.2 ohm
        • Material: Kanthal
        • Coil Type: Double Mesh
        • Wattage Range: 60 to 90W
      • Kanthal Triple Mesh
        • Resistance: 0.15 ohm
        • Material: Kanthal
        • Coil Type: Triple Mesh
        • Wattage Range: 80 to 110
      • SS316L Single Mesh
        • Resistance: 0.12 ohm
        • Material: SS316L
        • Temperature Range: 400 to 550 degrees Fahrenheit

    Box Contents

    • 1x Mesh Pro | Firelock | Fireluke | Fireluke Pro | Mesh Pro Atomizer Coil Heads by Freemax (3pcs)

    IMPORTANT NOTE: These are sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. These heads will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.

    Consumable item. This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    View Cart Go To Checkout

    Please Sign Up For Our Newsletter

    * indicates required