Ships within 24 to 48 hours (see our shipping policy for details).
Warranty
30-Day Limited Warranty on MOD Only. RDA / RTA does not carry any warranty and ā¦
Warranty
30-Day Limited Warranty on MOD Only. RDA / RTA does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival). See warranty section for details.
Description
Odin 100W MOD & Temple Mini RDA / Ether RTA Bundle || Vaperz Cloud x Dovpo x The Vaping Bogan
Save $25.00 off Normal Price with this bundle! Includes the Odin 100W MOD by Vaperz Cloud and your choice of either the Temple Mini RDA by Vaperz Cloud or Ether RTA by Suicide Mods x Vaping Bogan.
NOTE: If you prefer a different color RDA / RTA than what's listed, please enter color preference in the "Order Comments" section during Step 2 (Shipping) of the checkout process and we'll gladly accommodate your request if available.
Say hello to the latest in the Odin line of regulated devices, the Odin 100W. As with its predecessors, the Odin 100W is produced by the same great folks over at Vaperz Cloud and DOVPO along with everyone's favorite YouTube Aussie, The Vaping Bogan! Their collaborative effort has produced yet another device that could well be one of the best 100W devices on the market today.
The Odin 100W has a very similar look and feel to its DNA75C brother but has different key features. Rather than using an Evolv DNA chipset, it now features a Dovpo 100W Chipset, while utilizing USB Type-C for the charge/firmware port instead of a micro-USB port, and lastly incorporates zinc alloy construction.
Not only does the Odin 100W now use the modern day Type-C charge port, it is also compatible with either 18650, 20700 or 21700 batteries (sold separately) whilst still maintaining a small and ergonomic form factor.
Vaperz Cloud is ecstatic to bring back a blast from the past with this re-imagining of the original Mini Temple RDA! This new take brings the classic RDA into the current and modern vaping scene with updates on nearly every aspect of the atty! Sticking to it's roots with the classic 2 post deck design, with each post bringing you squared off 3mm post holes. This update allows enough room for today's exotic coils or large gauge wire builds. The biggest difference from the original is seen with the new and improved airflow. Taking a page out of the Asgard RDA's book of (vape) tricks, the Temple Mini 25mm RDA features a chamber reducer which not only improves the flavor given, but also positions the airflow intake higher to give a top-to-bottom airflow. As a result, potential leaking out of the air slots is greatly minimized.
Suicide Mods and the Vaping Bogan have struck gold again with the all new Ether RTA, a 24mm RTA that can deliver a tight restrictive Mouth-to-Lung vape as well as restricted Direct-to-Lung vape! The Ether RTA focuses on bridging the gap between affordable and high-end products by offering an option for vapers interested in exploring that side of the market. The Ether 24mm RTA accomplishes the goal of giving an amazing MTL vape experience while also having enough airflow to be a restricted DTL vape! Whether you are looking for a tank that is satisfying on a stealthy 12 watts or something a bit more substantial with a bit more heat at 40 watts – the Ether RTA is sure to fit your vaping needs!
*PLEASE NOTE THIS PRODUCT WILL ONLY SHIP TO A VERIFIED DOMESTIC BILLING ADDRESS (Your U.S. Credit Card Billing Address) & WILL REQUIRE A SIGNATURE AT DELIVERY. INTERNATIONAL CUSTOMERS MUST PAY BY BANK WIRE TRANSFER. INTERNATIONAL INQUIRES CAN BE MADE >HERE<
*This product does not qualify for free shipping and it has a fixed insured shipping cost of $7.99 for U.S. addresses ONLY.
Features
Odin 100W MOD
Billet Aluminum Chassis with Zinc Top & Bottom Plates
CNC Engravings
Accepts Single 18650 | 20700 | 21700 Batteries
Bottom Hinge-Lock Battery Door
Gold-Plated Contacts
Dovpo Chipset
0.01 Second Firing Speed
Variable Wattage Mode:
Wattage Range: 5W - 100W
Adjustable in 0.5W - 1W Increments
Round Robin
Output Voltage: 3.2V - 4.2V
Resistance Range: 0.06 ohm - 3.5 ohm
Temperature Mode:
Temperature Range: 200°F - 600°F
Supports:
Nickel (Ni200)
Titanium (Ti)
Stainless Steel (SS)
TCR
Bypass Mode
Four (4) Button User Interface
Oversized Firing Button
Up (+) Button | Select Button | Down (-) Button
0.96" TFT Color Display
Mode
Battery Life
Wattage
Resistance
Voltage
Amperage
Safety Protection Suite:
Short Circuit
Low Voltage
Overheat
High Temperature
Battery Reversal
Overtime Vaping Warning
No Load
Front-Mounted USB Type C Port
5V/1A Charging
Firmware and Software Upgrade
Stainless Steel 510 Threading
Dimensions: 90.5mm x 36.3mm x 32mm
Weight: 232.47g (approx. 8.2 oz)
Temple Mini 25mm RDA
Stainless Steel & Aluminum Construction
Media Blasted Stainless Steel Deck
Dual Post Build Deck
Two (2) 3mm x 3mm Terminals
Top Mounted Phillips Head Grub Screws
6mm Deep Juice Well
Locking Top Cap & Rail System
Unique, Fully Adjustable Airflow
42 Airflow Holes (21 Per Side)
1mm Diameter
Acrylic Airflow Diffuser
Acrylic Chamber Reducer
Includes Two-In-One Standard / Squonk BF 510 Pin
24k Gold-Plated Naval Brass 510 Pin & Post
Quick Release Squonk Pin - Pre-installed
Insert Grub Screws (Two in Deck) In Squonk Pin For Standard RDA Setup
Includes Low Profile Delrin 810 Drip Tip
Includes Spare Acrylic Cap
Smoke - Matte Black ONLY
Clear - Brushed Stainless Steel ONLY
Ultem - 24K Gold, Polished Gunmetal & Naval Brass
Diameter: 25mm
Ether 24mm RTA
Stainless Steel / Pyrex Glass Construction
2mL/4mL Juice Capacity
2mL Step-Down (Tapered) Glass Tank (Pre-installed)
4mL Step-Down (Tapered) Glass Tank w/ Extension (SOLD SEPARATELY)
Top-Fill
Quick Release Top Cap
Quarter Turn to Open / Close
Four (4) Kidney Bean Fill Ports
Postless Build Deck
Single Coil
Leads Can Be Inserted On Either Side
Phillips Head Screws
Dual Wicking Ports
PEEK Insulation
Removable Juice Reservoir
Easy Coil Access - Dumping Out Juice Not Required
Fully Adjustable Bottom AFC
Five (5) Airflow Options
One to Four 1.5mm Airflow Holes
Single 0.5mm Airflow Hole for MTL Vaping
Includes Three 510 Drip Tips
Shorty Wide Bore 510 Delrin Drip Tip (Pre-installed)
1x Shorty Wide Bore 510 Delrin Drip Tip (Pre-installed)
1x Smoked Glass Tank - 2mL
1x Ultem Glass Tank - 2mL
1x Extension Piece
1x Shorty Narrow Bore 510 Delrin Drip Tip
1x Tall Boy Narrow Bore 510 Delrin Drip Tip
1x Spare Parts Bag
Spare Post Screws
Spare O-Rings
1x Accessory Bag
1x Tank Extender
2x Deck Insert (For MTL Vaping)
Spare O-Rings
1x User Manual
IMPORTANT NOTES:
Understandinghow to handle and care for Lithium type batteriesis very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled. DO NOT charge your batteries overnight or while unattended for a prolonged period of time! Always charge your batteries in a fire-proof surface/area and DO NOT expose them to high temperatures (e.g. inside your car). DO NOT expose the battery's terminals to metal objects or immerse in water/liquid. We are not responsible for any damage if there is any misuse, abuse or modification of the batteries and/or chargers in any shape or form (including pack making). Furthermore, Electric Vapor Cigarettes LLC (a.k.a. EVcigarettes.com) will not be held responsible or liable for any injury, property damage, or defect that is caused by misuse, abuseor modification of Lithium batteries and/or chargers.
Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.
