$84.99
MSRP: $99.99
You save $15.00
Share

PR SE 95W Squonk Kit by Vandy Vape

Add to Cart

Options

$84.99
MSRP: $99.99
You save $15.00
Or

Info

SKU:200441 ,Availability: ,Width: ,Height: ,Depth:

Info

SKU:
200441
Availability:
Ships within 24 to 48 hours (see our shipping policy for details).

Warranty

DOA Warranty on the RDA. 30-Day Limited Warranty on the MOD. See warranty sect…

Warranty

DOA Warranty on the RDA. 30-Day Limited Warranty on the MOD. See warranty section for details.

Description

This product does not qualify for any discounts or promotional offers!

PR SE 95W Squonk Kit || A Tony B Project by Vandy Vape x El Mono Vapeador

The Vandy Vape PR SE Kit‘s mod features the Pulse V2 Mod with an updated Vandy Vape chipset, enabling a squonk experience with a max range of 95W and a plethora of settings such as temperature control, power, bypass, and voltage modes. Using a single 18650, 20700, or 21700 battery, you may recharge the cell while it is inside the mod thanks to a USB-C fast charging port. Best of all, feel safe using the PR SE Kit as there is a multitude of safety features such as over-puff, high current, open circuit, low battery, overheat, and short circuit protection. Inside the mod, there is also a 7mL squonk bottle with a bottom fill system that involves unscrewing a bottom cap.

The single-coil Requiem RDA that’s also included has three different air settings: mouth-to-lung, direct-to-lung, and restricted direct-to-lung. To modify the air setup, simply turn the top cap. The postless deck is compatible with a single coil build and two pre-built Fused Clapton 0.26 ohm coils are included. Installing a build is a simple as tightening two flathead screws. 

Features

Pulse V2 (II) 95W Squonk Mod

  • Super Durable Nylon & ABS Chassis
  • 7mL Juice Capacity
    • Silicone Bottle
  • Accepts Single 18650, 20700 or 21700 Battery
    • Interchangeable Magnetic Battery Bay Doors
      • Side-Loading
    • 18650 Battery Adapter Sleeve Included
    • Gold-Plated Battery Contacts
  • Three Button Control Interface
    • Oversized Firing Button
    • Two Adjustment (+ / -) Buttons
      • Lock by Pressing "+" and Firing Button For Two (2) Seconds
      • Flip Screen Orientation by Pressing "-" and Firing Button For (2) Seconds
      • For Stealth Mode (Display Off), Press "+" and "-" Button For Two (2) Seconds
      • For Settings, Press "+" and "-" Button for Two (2) Seconds
  • Powered by Upgraded Proprietary Vandy Chip Chipset
    • Waterproof PCBA
    • User-Input Output Curve Modes
      • Set for VW and/or TC
    • Bypass Mode
  • Wattage Mode:
    • Wattage Range: 5W – 95W
    • Voltage Range: 0.5V – 6.0V
      • VV Capable
    • Resistance Range: 0.05Ω – 3.0Ω
  • Temperature Mode:
    • Temperature Range: 200°F – 600°F
    • Resistance Range: 0.05Ω – 1.5Ω
    • Supports:
      • Nickel (Ni200)
      • Titanium (Ti)
      • Stainless Steel (SS)
      • TCR
  • 0.91" OLED Display Screen
    • Battery Life Indicator
    • Wattage
    • Resistance
    • Voltage
    • Puff Counter
    • Puff Timer
    • Six (6) Color Themes
  • Front-Mounted Type-C USB Port
    • Charging & Firmware Compatible
      • Max. Charge: 1A
  • Stainless Steel 510 Threads
    • Leak-Proof
    • Spring-Loaded Gold-Plated Squonk BF Pin
  • Safety Protection Suite:
    • Short Circuit Protection
    • Open Circuit Protection
    • Over-Heating Protection
    • Overcurrent Protection
    • Low-Battery Warning
    • 10-Second Cutoff
  • Dimensions: 82.3mm x 54.7mm x 28.4mm

Requiem RDA

  • Superior Stainless Steel Construction
  • Dual Terminal Postless Build Deck
    • Single Coil Build
    • Top-Mounted Flat Head Screws
    • PEEK Insulation
  • Three Interchangeable Airhoods
    • Direct Lung
    • Restricted Direct Lung
    • Mouth-to-Lung
  • Three Air Hood (AFC Cap) Options Included
    • Ultra Wide Bore DL (Direct Lung) Air Hood 
    • Wide Bore RDL (Restricted Direct Lung) Air Hood
    • MTL (Mouth To Lung) Air Hood
  • Bare Stainless Steel 510 Threads
    • Gold-Plated BF Squonk 510 Pin
  • Diameter: 22mm
    • 24mm w/ Included Beauty Ring

Box Contents

  • 1x Pulse V2 (II) BF 95W Squonk Mod
    • 1x 7mL Silicone Bottle - Smoked (Pre-installed)
    • 1x 18650 Battery Adapter
      • 1x Spare 7mL Silicone Bottle - Clear (Inside Battery Adapter)
  • 1x Requiem RDA
    • 1x Ultra Wide Bore DL (Direct Lung) Air Hood
    • 1x Wide Bore RDL (Restricted Direct Lung) Air Hood (Pre-installed)
    • 1x MTL (Mouth To Lung) Air Hood
    • 1x 24mm Beauty Ring
  • 1x Spare Parts Box
    • 1x Type-C USB Cable
    • 2x Pre-Built Fused Clapton Coil - 0.26 ohm
    • 1x Spare Parts Bag
      • 1x 2.5mm Winding Rod
      • 1x Allen Key
      • 1x Mini Screwdriver
      • 2x Spare Post Screw
      • 1x Spare 2-in-1 Gold-Plated 510 Pin (Traditional & Squonk)
      • Spare O-Rings
    • 1x User Manual / Warranty Card

IMPORTANT NOTE: Understanding how to handle and care for Lithium-ion batteries is very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled. DO NOT charge your batteries overnight or while unattended for a prolonged period of time! Always charge your batteries in a fire-proof surface/area and DO NOT expose them to high temperatures (e.g. inside your car). DO NOT expose the battery's terminals to metal objects or immerse in water/liquid. We are not responsible for any damage if there is any misuse, abuse or modification of the batteries and/or chargers in any shape or form (including operating while wired in series). Furthermore, Electric Vapor Cigarettes LLC (a.k.a. EVcigarettes.com) will not be held responsible or liable for any injury, property damage, or defect that is caused by misuse, abuse or modification of Lithium batteries and/or chargers.

Customers Also Viewed