Loading... Please wait...

Profile v1.5 24mm RDA by Wotofo x MrJustRight1

$29.99
$39.99 (You save $10.00)
SKU: 130237
Availability:
Ships within 24 to 48 hours (see our shipping policy for details).
Qty

    Profile v1.5 24mm RDA by Wotofo x Mrjustright1

    Wotofo x Mrjustright1 introduces the Profile 1.5 RDA. This updated version shares the same minimalist design, yet incorporates new mesh strips, bottom feed capability and an improved build deck. The new design also features a wide clamp style, dual post build deck that accommodates both mesh style coil sheets and regular performance coils. The newest nexMESH strips are designed specifically for the Profile 1.5 RDA with the industry's finest micro-weave design that delivers unreal flavor and vapor production. The ceramic support, located below the coil, is completely redesigned with a ridged surface to keep cotton in place. This further directs e-juice to the sides of the cotton for efficient saturation. The airflow intake is located on both sides of the chuff cap which can be adjusted to three airflow styles to ensure a personalized vape experience. To sum it up, the Wotofo x Mrjustright1 Profile 1.5 24mm BF RDA retains its easy to build status while producing the amazing flavor that we've come to expect from mesh coils and the Profile series.

    Find Your Spares and Supplies Here:

    Features

    • Dual Vertical Clamp Post Build Deck
      • 10mm x 5mm Clearance
        • Side Mounted Phillips Screws
      • PEEK Insulation
      • 5mm Deep Juice Well
      • Spring Loaded Central Ceramic Support
        • Supports Cotton Against Mesh Heating Element
    • Fully Adjustable Airflow
      • 10 Airflow Slots Each Side
        • Each 1.5mm Wide
        • 2 x 5 Configuration
    • Bare Stainless Steel 510 Threads
      • Gold-Plated Squonk BF Positive Pin (Pre-Installed)
      • Gold Plated 510 Positive Pin
    • 10mm Bore 810 Acrylic Drip Tip
      • Includes Spare 10mm Bore 810 Acrylic Drip Tip (Angled)
    • nexMESH Coil Sheets Included
      • nexMESH Turbo
        • Coil Material: Kanthal A1
        • Resistance: 0.13 ohm
        • Wattage Range: 60W to 80W
        • Dimensions: 17mm x 8.5mm
      • nexMESH Chill
        • Coil Material: Kanthal A1
        • Resistance: 0.15 ohm
        • Wattage Range: 60W - 80W
        • Dimensions: 17mm x 8.5mm
      • nexMESH Extreme
        • Coil Material: Kanthal A1
        • Resistance: 0.16 ohm
        • Wattage Range: 60W - 80W
        • Dimensions: 17mm x 8.5mm
    • Diameter: 24mm

    Box Contents

    • 1x Profile v1.5 RDA
    • nexMESH Coils
      • 1x nexMESH Turbo - 0.13 ohm
      • 1x nexMESH Chill - 0.15 ohm
      • 1x nexMESH Extreme - 0.16 ohm
    • 3x 6mm XFiber Organic Cotton Strip
    • 1x Mesh Bending Tool
    • 1x Allen Key
    • 1x Phillips Head Screwdriver
    • 1x Spare Parts Bag
      • 1x Spare Acrylic 810 Drip Tip (Angled)
      • 1x Gold-Plated 510 Positive Pin
      • 2x Spare Post Screw
      • Spare O-Rings
    • 1x User Manual

    IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    View Cart Go To Checkout
    

    Please Sign Up For Our Newsletter

    * indicates required