Loading... Please wait...

Pulse X BF 90W Squonk MOD Kit by Vandy Vape

$89.99
SKU: 210021
Availability:
Ships within 24 to 48 hours (see our shipping policy for details).
Qty

    Pulse X BF 90W Squonk MOD Kit by Vandy Vape

    The Pulse X BF 90W Starter Kit comes equipped with the proprietary Vandy Chip, variable 90W output, multiple power output modes, and an 8mL easy-grip squonk bottle. The Pulse X has an output wattage of 5 to 90W, a 0.5 to 8.5V output range, 0.05 to 3 ohm resistance range in variable wattage mode, and a 0.05 to 1.5 ohm resistance range temperature control resistance mode. The Vandy Chip also has power, bypass, and voltage output modes. This device, much like it's predecessor, features a simple three button interface with one oversize firing button, and two adjustment buttons. The Pulse X is compatible with either 21700, 20700 or 18650 batteries and comes with a battery adapter. The proprietary Vandy Chip has a set of safety features that include overheating protection, open circuit protection, short circuit protection, overcurrent protection, and overtime protection, and low battery warning.

    Along with the Pulse X BF 90W is the Pulse X 24mm BF RDA. A 24mm rebuildable atomizer capable of bottom feeding with a unique X style dual post quad terminal build deck. The build deck of the Pulse X allows users to have their coil orientation as vertical or horizontal. Featured on top of the Pulse X is a shower head style allowing direct squonk to cotton. Airflow enters the Pulse X through 6 airflow slots and can be fully adjusted with the inner airflow slot located on the top cap. Along with the Pulse X is a PC frosted white top cap that can be interchanged allowing for flexibility; Equipping the PC Frosted White Top Cap on the Vandy Vape Pulse X removes the capability of airflow adjustment. The bottom 510 pin comes with preinstalled with a squonk pin but can be interchanged with a regular pin. The Special Editions come paired with the Pulse V2 RDA that also include 3 separate airflow rings. 

    The Pulse X BF 90W Starter Kit along with the Pulse X 24mm BF RDA is a solid device for users looking for the convenience of a bottom-fed system, as well as the versatility of the Vandy Chip.

    NOTE: Pulse V2 RDA available only with Special Edition Kits. 

    Features

    Pulse X BF 90 Squonk MOD

    • Nylon & ABS Chassis
    • Three Button Control Interface
      • Oversized Firing Button
      • Two Adjustment Buttons
        • Lock by Pressing "+" and Firing Button For Two (2) Seconds
        • Flip Screen Orientation by Pressing "-" and Firing Button For (2) Seconds
    • 8mL Juice Capacity
      • Silicone Bottle
        • Additional Colors (Sold Separately)
    • Accepts Single 18650, 20700 or 21700 Battery
      • Interchangeable Magnetic Battery Bay Doors
        • Side-Loading
        • Additional Door Panels Sold Separately
      • 18650 Battery Adapter Included
      • Gold-Plated Battery Contacts
    • Powered by Proprietary Vandy Vape Chipset
      • User-Input Output Curve Modes
        • Set for VW and/or TC
      • Bypass Mode
    • Wattage Mode:
      • Wattage Range: 5W – 90W
      • Voltage Range: 0.5V – 8.5V
        • VV Capable
      • Resistance Range: 0.05Ω – 3.0Ω
    • Temperature Mode:
      • Temperature Range: 200°F – 600°F
      • Resistance Range: 0.05Ω – 1.5Ω
      • Supports:
        • Nickel (Ni200)
        • Titanium (Ti)
        • Stainless Steel (SS)
        • TCR
    • 0.91" OLED Display Screen
      • Battery Life Indicator
      • Diagonal Arrangement
      • Output Current / Temperature / Wattage / Voltage
      • Material & Mode Selection
      • Atomizer Resistance
    • Front-Mounted Micro USB Port
      • Charging & Firmware Compatible
        • Max. Charge: 1A
    • Stainless Steel 510 Threads
      • Leak-Proof
      • Spring-Loaded Gold-Plated Squonk BF Pin
    • Safety Protection Suite:
      • Low-Battery Warning
      • Overheat Protection
      • High/Low Voltage
      • High/Low Amperage
      • Open/Short Circuit Protection
      • High/Low Resistance
      • High PCB Temperature
    • Dimensions: 82.6mm x 54.8mm x 27mm

    Pulse X RDA

    • 304 Stainless Steel Construction
    • X Style Dual Post Quad Terminal Build Deck
      • 3mm x 3mm Terminals
        • Side-Mounted Phillips Head Screws
      • 5mm Deep Juice Well
      • Vertical OR Horizontal Coil Build
      • Waterfall Squonk Action
    • Vandy Vape Coil Lead Guide
      • Place Coils on Top of Coil Lead Guide to Cut to Size for Height
      • Recommended Coil Lead at 7
    • Top Cap Ramp Airflow System
      • Dual Airflow Slots
        • 8mm x 2mm Per Air Slot
      • Fully Adjustable
        • Six (6) Airflow Slots
          • Half Closed
          • Single Coil
          • Fully Open
        • 3mm x 1mm
    • PC Frosted Top Cap Airflow System
      • Dual Airflow Slots
        • 5mm x 3mm
      • Non-Adjustable
      • Top Cap Acts as Drip Tip
    • Gold-Plated 510 Squonk BF Pin
    • 9mm 810 Acrylic Drip Tip
      • 510 Drip Tip Adapter
    • Diameter: 24mm

    Pulse V2 RDA (Special Edition Only) 

    • 304 Stainless Steel Construction
    • Floating Dual Post, Four Terminal Build Deck
      • 3mm x 2mm Terminals
        • Side-Mounted Hex Screws
      • 5mm Deep Juice Well
      • Top Squonk Feeding
      • E-Juice Overfill Return Port
    • Interchangeable PEI Internal Airflow Rings
      • Single Coil Honeycomb Design
        • Eight (8) 1.5mm Air Holes Per Side
        • 6mm Long Slanted Jet Funnel
      • Dual Honeycomb Design
        • Eight (8) 1.5mm Air Holes Per Side
        • 3mm Long Slanted Jet Funnel
      • Dual Coil Large Airflow Design
        • 8mm x 3mm Air Slot Per Side
        • 3mm Long Slanted Jet Funnel
    • Dual Segment Airflow Adjustment
      • Upper Segment w/ Dual Airflow Slots
        • 7.5mm x 4mm Per Air Slot
      • Rotating Upper Top Cap Segment
      • Notched Locking Barrel Lower Segment
    • Gold-Plated 510 Squonk BF Pin
    • 12.5mm Wide Bore 810 Acrylic Drip Tip
      • 510 Drip Tip Adapter
    • Diameter: 24mm
      • Height: 34.5mm

    Box Contents

    • 1x Pulse X BF 90W Squonk MOD Kit by Vandy Vape
      • 1x 8mL Silicone Bottle
    • 1x Pulse X RDA -OR- Pulse V2 RDA (Special Edition Only)
      • 2x Coils
    • 1x Airflow Cap
    • 1x Spare Parts Bag
    • 1x 18650 Battery Adapter
    • 1x QC Micro-USB Cable
    • 1x User Manual

    IMPORTANT NOTE: Understanding how to handle and care for Lithium-ion batteries is very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled. DO NOT charge your batteries overnight or while unattended for a prolonged period of time! Always charge your batteries in a fire-proof surface/area and DO NOT expose them to high temperatures (e.g. inside your car). DO NOT expose the battery's terminals to metal objects or immerse in water/liquid. We are not responsible for any damage if there is any misuse, abuse or modification of the batteries and/or chargers in any shape or form (including operating while wired in series). Furthermore, Electric Vapor Cigarettes LLC (a.k.a. EVcigarettes.com) will not be held responsible or liable for any injury, property damage, or defect that is caused by misuse, abuse or modification of Lithium batteries and/or chargers.

    30-Day Limited Warranty. See Warranty section for details.

    View Cart Go To Checkout
    

    Please Sign Up For Our Newsletter

    * indicates required