Smok TFV12 Prince Atomizer Coil Heads (3pcs)

The replacement atomizer cores for the Smok TFV12 are a feat of themselves engineering-wise, given their high operating wattage range yet pristine flavor, but they still didn't cater to the needs of the common flavor-fiender.

That's where the Smok TFV12 Prince comes into play. In each 3 pack of coils for your TFV12 Prince, you'll have all you need to take on your juices in a whole new way! The flavor-centric designs of the TFV12 Prince coils promote rich, enveloping vapor bursting with flavor at every turn.

NOTE: RBA Head sold as a single piece and does not come in a 3 pack.

Features

• Stainless Steel Chassis
• Organic Cotton Wicking
• Prince Coil Family
• V12 Prince-Q4
• Quadruple Coil
• 0.4Ω
• Wattage: 40W – 100W
• Best: 60W – 80W
• V12 Prince-M4
• Quadruple Coil
• 0.17Ω
• Wattage: 30W – 70W
• Best: 40W – 60W
• V12 Prince-X6
• Sextuple Coil
• 0.15Ω
• Wattage: 50W – 120W
• Best: 80W – 100W
• V12 Prince-T10
• Decuple Coil
• 0.12Ω
• Wattage: 60W – 120W
• Best: 80W – 110W
• V12 Prince Mesh
• Mesh Coil
• 0.15Ω
• Wattage: 40W - 80W
• Best: 60W – 70W
• V12 Prince Dual Mesh
• Dual Mesh Coil
• 0.2Ω
• Wattage: 50W - 80W
• Best: 65W - 75W
• V12 Prince Triple Mesh
• Triple Mesh Coil
• 0.15Ω
• Wattage: 60W - 100W
• Best: 80W - 90W
• V12 Prince Max Mesh
• Mesh Coil
• 0.17Ω
• Wattage: 70W - 130W
• Best: 100W - 120W
• V12 Prince Strip
• Perforated Kanthal Strip
• 0.15Ω
• Wattage: 40W - 100W
• Best: 80W – 90W
• V12 Prince T10 Red Light
• 0.12Ω
• Wattage: 60W - 120W

Box Contents

All Coils Except Prince RBA Head

• 1x Smok TFV12 Prince Atomizer Coil Head (3pcs)

Prince RBA Head

• 1x Smok TFV12 Prince RBA Head 
• 1x Allen Key
• 4x Spare Screws
• 2x O-Rings

IMPORTANT NOTE: These are sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using sub-ohm coils. These coils will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 25A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, Ohm’s Law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.