Swiss 18650 Mech MOD by Comp Lyfe
Known for their high quality pieces, Comp Lyfe returns with yet another eye-catching, signature Mech MOD, the Swiss 18650 Mech MOD. Featuring a design pattern akin to Swiss cheese, this new mech utilizes a single 18650 high-amp Battery and has a fixed 510 hybrid top for enhanced conductivity. The solid metal chassis sculpted from brass pushes nothing but power to installed atomizers for a hearty punch from every draw.
NOTE: Hydrodipped MODs and Caps were dipped as a set to ensure the pattern is continuous. Hydrodipped patterns may vary slightly from product photo. Since they are hydrodipped, you will see some slight imperfections such as (1) a vertical seam going down the back of the mod where the pattern connects or (2) slight imperfections at the top/bottom of the cap and/or the top/bottom of the tube. When the mod is fully assembled (including a drip tip) you will not see the majority of these imperfections.
*PLEASE NOTE THIS PRODUCT WILL ONLY SHIP TO A VERIFIED DOMESTIC BILLING ADDRESS (Your U.S. Credit Card Billing Address) & WILL REQUIRE A SIGNATURE AT DELIVERY. INTERNATIONAL CUSTOMERS MUST PAY BY BANK WIRE TRANSFER. INTERNATIONAL INQUIRES CAN BE MADE >HERE<
*This product does not qualify for free shipping and it has a fixed insured shipping cost of $6.99 for U.S. addresses ONLY.
PLEASE NOTE: This is a direct battery contact mechanical device and it is strictly for ADVANCED USERS ONLY! Be sure to check your atomizer's 510 connection when using it with this device. If your atomizer's positive pin in the center of the 510 connection does not protrude >1mm from the threads of the connection, your device WILL fail catastrophically. Use at your own risk! This mod does not have a locking mechanism, so keep it away from children! Mechanical mods are an advanced user product and should not be used by anyone without the proper knowledge on your battery's amp limit and how to test your atomizer's resistance. This mechanical mod uses very strong magnets in the switch—please be careful when disassembling your mod. Avoid using your device to the point where the batteries are completely discharged. Always double-check the resistance of your atomizer on an external ohmmeter, and ensure that your batteries are inserted with the positive pole facing the atomizer in order to prevent battery failure.