The Rye V1.2 24mm RDA || 99Wraps, LLC x BlueEyedGoon83
The Rye V1.2 RDA is a collaboration between 99wraps and the @BlueEyedGoon83, or better known as Shawn Hart, the designer of the Good RDA. The Rye V1.2 RDA features a stunning 4.2mm long chamber on both sides of the upper level cyclops airflow intake. Starting at 9.2mm wide at its widest point on the outside of the barrel, the intake is chambered at a precise 45° angle all the way to a perfect 5mm x 1mm intake on the back end of the inner AFC tab. This is a smaller (slightly more constrictive) and more precise opening than the original Rye RDA.
Listening to feedback, 99wraps has greatly reduced the width between the dual posts of the V1.2, making it far more practical for the kinds of builds that excel in the Rye. The posts are now perfectly centered as well. It also features a deck that's almost 50% more convex than the first version of the Rye RDA. As a result, E-liquid will cascade down toward the wicks and away from the dreaded spit-back zone that exists in most traditional RDAs.
The included robust, hex tool has been reversed and grub screws are now even less likely to strip than they were before. Therefore, it is now easier to install, tighten, and safely secure your leads. This also gives you the extra torque you need when installing and tightening the included bottom feeding squonk pin.
Finally, the Rye RDA comes with a host of extras. Not only does the V1.2 come standard with a backup silver-plated copper connection pin, but included are two plastic RDA/MOD Protective Discs, a squonk pin, and even a fat extra o-ring for your top cap in case you're at a higher altitude and need a thicker grip.
Find Your Spares and Supplies Here:
IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.