MSRP: $39.99
You save $10.00

Vertex MTL 22mm RTA by Hellvape

Add to Cart


MSRP: $39.99
You save $10.00


SKU:140405 ,Availability: ,Width: ,Height: ,Depth:


Ships within 24 to 48 hours (see our shipping policy for details).


This product does not carry any warranty and we only guarantee that you will not…


This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).


Vertex MTL 22mm RTA || Hellvape

The Vertex RTA by Hellvape is the newest flavor oriented RTA, offering a smooth draw and delicious flavor thanks to the turntable style airflow and external airflow port. The Vertex features a replaceable 510 drip tip, threaded dual port top, 2mL and additional 3.5mL glass tanks. At the bottom of the tank are various external airflow customizations which feature an elegant knurled ring for easy tactility. This air slot can be adjusted with a single large port and six pre-set MTL adjustments. This style airflow will lead to the center airflow channel located in the center of the build deck. The deck itself is a single coil design with 4mm terminals and top mounted flat head screws. Surrounding the airflow channel are two large wicking channels which allow for easier wicking. The most defining feature is the turn table styled airflow which is secured inside the build deck section via a side mounted o-ring. This feature offers a smooth steady flow of air to the coil and can be adjusted to the individual preference. The turn table styled airflow has three different styles, one wide open slot, a MTL three hole variation and a single MTL. Overall, this atomizer is perfect for users looking for a simple RTA with massive amounts of airflow customization.

Find Your Spares and Supplies Here:

Build Tools, Cotton, Wick & Wire


  • 304 Grade Stainless Steel / Pyrex Glass Construction
  • 2mL / 3.5mL Standard Glass Tank Capacity
    • 2mL Straight Glass / 3.5ml Extended Glass
      • Threaded Top-Fill Cap
      • Dual Kidney Bean Fill Ports
  • Dual Post Build Deck
    • Single Coil Configuration
    • Single Vertical Terminal Per Post
      • __mm Terminals
      • Top-Mounted Flathead Grub Screws
    • PEEK Insulation
  • Fully Adjustable Bottom Airflow & Deck Turntable
    • Knurled Grip
    • Six (6) Air Hole Options
      • Five (5) Single Hole Inlets: 0.8mm, 1.0mm, 1.2mm, 1.4mm and 1.6mm
      • One (1) 5.8mm x 1.7mm Cyclops Slot
    • Deck Turntable
      • Three (3) Deck Airflow Intake Options
        • Single 0.8mm Hole
        • Triple 0.8mm Holes
        • Single 1mm x 3.2mm Slot
  • Threaded Delrin Drip Tip
    • 510 Adapter / Compatible
  • Stainless Steel 510 Threads
    • Gold-Plated Copper Positive Pin
  • Dimensions:
    • 2mL: 53mm (H) x 22mm (D)
    • 3.5mL: 58mm (H) x 22mm (D)

Box Contents

  • 1x Vertex MTL 22mm RTA
    • 1x Straight Glass Tank - 2mL (Pre-installed)
  • 1x Extended Glass Tank - 3.5mL
  • 1x Chimney Extension
  • 5x Kanthal A1 26g Pre-built Coil - 0.6 ohm (2.5mm ID)
  • 5x Kanthal A1 28g Pre-built Coil - 1.0 ohm (2.5mm ID)
  • 1x Cotton Pad
  • 1x Spare Parts Bag
    • 1x Mini Screw Driver
    • 1x Chimney Removal Tool
    • Spare Top-Fill Gasket
    • Spare Post Screws
    • Spare O-Rings
  • 1x User Manual

IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

Customers Also Viewed