Loading... Please wait...

Youde (UD) Stainless Steel 316L Resistance Wire

 star rating 5 Write a Review
$7.99 (You save $5.49)
SKU: 780182
Ships within 24 to 48 hours (see our shipping policy for details)
Youde (UD)

    Stainless Steel 316L Resistance Wire by UD

    UD Builder's Choice SS316L Wire is the new way to wrap and assemble your coils, utilizing extremely high grade Surgical Grade Stainless Steel 316L. This material is extremely durable, resistant to corrosion and wear, featuring a composition with extra low levels of carbon. Featured in the new Aspire Triton Atomizer as well as the Horizon Phantom Atomizer, 316L is quickly asserting itself as a definitive heating material for both TC and non-TC devices.

    Price is for one (1) thirty (30) foot roll. Available in 24 AWG, 26 AWG & 28 AWG.


    Write your own product review

    1. Great quality, hard to work with  star rating

      Posted by The Captain on 24th Feb 2016

      First, the quality of this wire is great. I read that some SS wire needs to be cleaned before use, but that is not the case here. There was no residue on it and it appears to be flawless.

      However the wire is really hard to work with. It is pretty springy. Worse you can't light it up like you can with kanthol, so it is hard to see if there are any hot spots. I am not taking any points off for this, because it is my inexperience more than a problem with the wire that causes this problem. The coils need to be wrapped super tight, and a torch might help (I don't have one, its on the list). Other wise even the slightest adjustment can make the coil go out of whack. If you are new to building coils like I am, you may want to start with kanthol in stead. This wire is doable, but I have had to build a lot of coils to get a good one. Just a tip, the easiest way to build a coil with this stuff imo is to get a screw of the diameter you want and make your coil that way. To me the flavor is not as good compared to a micro coil where the coils are touching, but at least it is easier to avoid hot spots.

      A good wire, but maybe not for beginners. I got the 28g, maybe the 26g would be easier to work with.

    2. stainless steel best wire going.  star rating

      Posted by Unknown on 26th Dec 2015

      Easy to work with and very durable. Works wonderful in temp control with out the metalic taste like ni200. Only wire i use now for tc and power mode.

    3. The Best Wire  star rating

      Posted by Harvey Webb on 21st Dec 2015

      The best wire for wraping your own coils, works perfect with all my temp control devices that support SS. No metal taste like NI200 or off flavor like Kanthal, better flavor than TIA1. This is my new go to wire for getting the true flavor of my ejuice. I DIY and I can say without a doubt you will love this wire!

    4. Flavor without Temp Control!  star rating

      Posted by Chris Rhodes Cumberland, MD on 7th Dec 2015

      I've bought multiple rolls of 24ga and 26ga, by far the 26ga is my favorite. The easiest way to explain how SS 316L wire vapes, is to say it gives you Nickel flavor, but without having to use temp control if you don't want to. All my RDA's and RTA's now only have this wire in it. For RTA's I recommend 6-7 wrap spaced dual coils for perfect flavor and plenty of vapor prod. And 8 wraps 24ga contact dual coils ohm out at .2 around 2.5mm in RTA's give a awesome vape around 50 watts! EV has exceeded all my expectations with customer service, and has been the fastest shipping I've ever got. Youde is the only SS wire I can find, I wish it came in longer rolls, but for $4.99 I can't complain. Awesome wire!!! Trying to stock up for a while! :) Thanks EV!

    5. Great improvement  star rating

      Posted by Unknown on 21st Nov 2015

      Great product i'll buy it again.
      i used for TC (ss mode) Mod and Mech Mod with no problem.
      Also changed some of my RDA kanthal coil to Stainless Steel Coil and work great lots of vapor

    6. 5 stars for service  star rating

      Posted by Unknown on 9th Nov 2015

      I enjoy having coils that stay clean longer. 316L is simply low resistance wire. My 5 star rating is for their customer service. Very responsive!

    7. not bad  star rating

      Posted by raymond jensen on 13th Oct 2015

      its ok if you like a little higher ohm but all and all its good I got the 28 should of got the 26 but o well pease out and vape on

    8. Good Purchase!  star rating

      Posted by Unknown on 5th Sep 2015

      Enjoying the performance, and flavor off this wire. Glad I read some reviews and purchased the 28 gauge, that was helpful as it takes 10 wraps around my 2.5mm coil tool to get a 1 ohm coil, which I prefer on my sigelei/ Lemo setup. Would have taken 16 wraps for the same coil if I purchased 26 gauge. Thanks steam-engine. Looking forward to trying the Clapton wire, and the new titanium wire also.

    9. Its all I use now  star rating

      Posted by Ernie on 1st Sep 2015

      Resistance is low so more wraps and ramp up time isn't affected.. Win Win Win... its all I use now

    10. Easy to work with  star rating

      Posted by SheVapes on 25th Aug 2015

      I noticed some of the new sub ohm tanks were coming with stainless coils so I decided to give it a try. I have about 3 minutes worth of patience per day and this wire doesn't test that limit. It's very cooperative.

      I clean every wire I use with alcohol before use and I don't do a lot of dry burning. If you do dry burn you'll notice the resulting coil color to be different from Kanthal. I've built both spaced and micro coils with the 316L and all have been sturdy, easy to maintain and long lasting. They ohm out a tad lower than Kanthal but not as low as titanium or nickel.

    Consumable Item. No warranty, refunds or exchanges allowed.

    View Cart Go To Checkout

    Please Sign Up For Our Newsletter

    * indicates required